Description
Aqua-UV Classic 114 Watt 2" UV Sterilizer With Wiper-Black
The Aqua-UV Classic 114 Watt 2" UV Sterilizer With Wiper is, a powerful solution for controlling algae and harmful bacteria in your water system. Utilizing ultraviolet (UV) technology, this sterilizer effectively eliminates contaminants without leaving any harmful residuals, ensuring clean and clear water for your aquatic environment. Crafted with the highest quality components, this unit is engineered to deliver exceptional performance, ease of installation, and low maintenance requirements.
The 114 Watt Classic UV is designed to sterilize freshwater bodies ranging from 2200 to 4400 gallons of fresh water, or up to 700 gallons of *salt water. However, it's important to note that the use of wipers with salt water is not recommended, as it may void the warranty on the wiper parts.
Aqua Ultraviolet Sterilizers are renowned for their ability to clear water rapidly, often achieving results within 3-5 days or even overnight. When properly sized, installed, and operated according to instructions, these units guarantee optimal performance and water clarity.
Featuring a 2" PVC slip port, this sterilizer is easy to install and does not require adjustments to your water flow. Its compact and lightweight design, combined with quick-release connections, ensures hassle-free maintenance and winterization. The lamp is strategically positioned within the housing for maximum UV effectiveness, while the slender housing design allows for higher UV dosage.
Designed for both indoor and outdoor use, this unit comes with a one-year warranty from the date of purchase, providing you with peace of mind and assurance of its quality and durability.
Features & Benefits
Easy Twist Cap for Quartz Sleeve Maintenance: Simplifies maintenance with a single cap twist for access to the quartz sleeve.
Quick Release T's for Easy Installation and Winterization: Facilitates installation and winterization with quick-release connections.
Lamp Positioned for Maximum UV Effectiveness: Ensures optimal UV exposure for efficient sterilization.
Slender Housing Design Allows for Higher UV Dosage: Optimizes UV dosage for enhanced performance.
Designed for Maximum Flow Rates: Accommodates high flow rates to fully utilize your water pump.
Easy-to-Remove Remote Power Supply: Simplifies maintenance and servicing.
Suitable for Indoor or Outdoor Use: Versatile design for various water system applications.
One-Year Warranty: Provides peace of mind and assurance of product quality.
Specifications
Dimensions for Unit: 20” x 3-3/4” x 16-1/2”
Dimensions for Unit with Wiper: 21-7/8” x 3-3/4” x 16-1/2”
Wiper Clearance: 16"
Freshwater: 2,200 – 4,400 Gallons
Saltwater: 700 Gallons
*Aqua Ultraviolet does not recommend utilizing Wipers with Salt Water and if utilized in this manner will void warranty on the Wiper parts.
Recommended Flow Rate for UV Dosages:
at 30,000 µw/cm2 (EOL) GPH: 3,900 (Max Flow Rate)
at 45,000 µw/cm2 (EOL) GPH: 2,600
at 60,000 µw/cm2 (EOL) GPH: 1,950
at 75,000 µw/cm2 (EOL) GPH: 1,560
at 90,000 µw/cm2 (EOL) GPH: 1,300 (Min Flow Rate)
How It Works
The ultraviolet light sanitizer emits a germicidal ray which alters or disrupts the DNA or RNA of single-celled organisms. Ultraviolet is a proven ultraviolet water purification system for controlling algae, bacteria, and protozoa.
The UV controls the spread of fish disease, viruses, and other harmful pathogens, as well as keeping your water clear by destroying free-floating algae.
Aqua Ultraviolet’s Light Sanitizers will clear your water in 3 to 5 days, sometimes overnight, and keep it that way.
Performance is guaranteed when sized, installed and operated according to our instructions.
Installation
FAQ
Where do I install my UV?
The best place to install your Aqua Ultraviolet water purification system is after the filter. If an after the filter installation is not feasible, your ultraviolet sterilizer can be installed before the filter, but it will take a little longer to work. If installed before the filter, be aware that a small rock passing from the pump can break the quartz sleeve. It is recommended that if you install your unit before your filter, you check the ultraviolet light sanitizer periodically for any water leakage due to a broken quartz sleeve.
Be sure to have adequate pre-filtration to prevent breakage. (A broken quartz sleeve and any damage caused by a broken quartz sleeve is not covered under warranty.)
Do I have to turn my UV off when I clean my filter?
Yes, but only if the chamber is drained or if the water will remain at a stand still for more than 30 minutes. Note: Running longer than the recommended time without water flow can cause extensive damage to the unit that is not covered under warranty.
What should I expect after my ultraviolet water purification system is installed?
If your Aqua Ultraviolet system is installed after the filter and is properly sized the water should be clear in 3-5 days. If your Aqua Ultraviolet light sanitizer is installed before the filter the water should be clear in 7-10 days. The green algae on the sides and bottom of the pond will not disappear, this is normal in a pond. The UV does not control this type of algae.
What’s the difference between a sterilizer and a clarifier?
As a sterilizer, your Aqua Ultraviolet water purification system will keep your pond or aquarium water crystal clear, plus you will have the added benefit of bacterial control which will help keep your fish healthy and happy with less risk of disease.
As a clarifier the algae in your pond will be reduced, your pond will still have a green tint to it, unless you have 50-75% plant coverage or your pond is in full shade.
Do I install my ultraviolet light sanitizer vertically or horizontally?
You can install it either way. The Wiper version should be installed horizontally to keep the wiper seal wet.
What should my flow rate be on my pond or freshwater aquarium?
The optimum flow rate on your pond or fresh water aquarium is to turn over the volume of water one time every hour to every hour and a half.
What should my flow rate be on my saltwater aquarium?
Your flow rate should be 3 to 5 times the volume of water per hour.
Should I bypass part of my water through the ultraviolet water purification system and the rest back to the water supply?
No, Our UV’s are specifically designed to handle high flow rates for easier installation and the best water quality.
Is this unit submersible?
No, not this specific series.
Does the UV light have any residual effect to the fish?
UV only affects what passes through the chamber. There is no residual effect from ultraviolet light sanitation.
Does the UV kill good bacteria?
Ultraviolet light does not discriminate about what it destroys. If good bacteria passes by the ultraviolet light sanitizer it will be destroyed. Beneficial bacteria are colonized in your filter and along the sides and bottom of your pond. The only time those will be affected is if it becomes free floating and passes through the ultraviolet water purification system.
How often should I change my lamp?
The lamp should be changed after 14 months of continuous use
Are all UV lamps of the same length the same wattage?
No. The power output of the lamp has nothing to do with its length; other factors like the amount of mercury it contains and the power supply that feeds the lamp govern this.
