Canadian Dollar
US dollar
Product Description
Can-Air Aeration Systems Components
- Energy-efficient tech-aire piston compressor with air inlet filter. One year standard warranty, two year warranty when purchased with cabinet.
- Pond Pro weighted tubing
- Can-Air diffuser Assemblies with weighted base.
- All fittings and clamps necessary to assemble your system.
- Multiple diffuser systems include a manifold with valves to control air flow to each diffuser.
- 25% more diffuser area than most systems out there.
Our compressors and the associated cooling fans are available in 120 or 240 volt
|
Can-Air 1 |
Can-Air 2 |
Can-Air 3 |
|
(1) KM-60 Teich-Aire Compressor w/ heatline & fittings assembled
(1) Compressor shelf w/ cooling fan/cord
(1) 100’ 3/8” sinking airline
(1) Can-Air Diffuser
Required Fittings
|
(1) KM-60 Teich-Aire Compressor w/ (2) heatlines and additional brass fittings assembled
(1) Compressor shelf w/ cooling fan/cord
(2) 100’ 3/8” sinking airline
(2) Can-Air Diffusers
Required Fittings |
(1) KM-120 Teich-Aire Compressor
(1) 3-way manifold w/ heatline
(1) Compressor shelf w/ cooling fan/cord
(3) 100’ 3/8” sinking airline
(3) Can-Air Diffusers
Required fittings |
|
Can-Air 4 |
Can-Air 5 |
Can-Air 6 |
|
(2) KM-60 Teich-Aire Compressor w/ heatline & fittings assembled
(2) Compressor shelf w/ cooling fan/cord
(4) 100’ 3/8” sinking airline
(3)Can-Air Diffuser
Required Fittings
|
(1) KM-60 Teich-Aire Compressor w/ (2) heatlines and additional brass fittings assembled
(1) KM-120 Teich-Aire Compressor (1) 3-way manifold
(2) Compressor shelf w/ cooling fan/cord
(5) 100’ 3/8” sinking airline
(5) Can-Air Diffusers
Required Fittings |
(2) KM-120 Teich-Aire Compressor
(2) 3-way manifold w/ heatline
(2) Compressor shelf w/ cooling fan/cord
(6) 100’ 3/8” sinking airline
(6) Can-Air Diffusers
Required fittings |
Advantages of using a Can-Air Aeration System
- Made in Canada
- No floating equipment or electricity in the water
- Can-Air Aeration will improve water quality by moving water slowly over the bottom substrate of the pond. Phosphates are reduced by up to 95% in many cases.
- Can-Air systems can aerate for as little as is cost effective to purchase and operate for larger surface areas. These systems can effectively de-stratify and aerate deep lakes with much lower equipment costs and energy consumption. Can-Air systems are the most efficient on the market.
- Easy set up and low maintenance. Most maintenance and inspection may be conducted onshore.
If there is no aeration currently in your fish pond, the diffuser should be lowered roughly half the depth, and then slowly lowered all the way to the bottom over the next few weeks at a rate of 2 feet every other week until it is at the pond bottom
If the diffuser is lowered to the bottom right away you risk stirring up toxic gases that could kill your fish. Lowering it slowly over time will eliminate this risk
Recommended Sizing guide to maintain an ideal circular pond with good water in a stable climate (ex. southern US, consistently warm temperatures)
|
Can-Air System |
Suface Acres*
|
# of Diffuser Assumblies
|
Cabinet Opitons
|
|
CA1 |
1.6 max
|
1
|
Post Mount (PM) No Cabinet (NC) |
|
CA2
|
2.8 max
|
2
|
|
|
CA3
|
4.8 max
|
3
|
|
|
CA4
|
5.6
|
4
|
Post Mount (PM No Cabinet (NC) |
|
CA5
|
7.6
|
5
|
|
|
CA6
|
9.6
|
6
|
|
|
*Max area for one diffuser for circular shape pond min 8 feet deep. For optimal water quality we recommend one diffuser for every 150 feet diameter. For ponds 16' deep multiply acres x 1.25 Sizing assistance available. |
|||
Our aeration sizing recommendations to improve water quality and keep fish alive in colder climates (ex. Canada)
|
|
Area Covered by 1 Can-Air SS Diffuser |
|
|
Pond Depth |
Good Ponds/Preventative |
Eutrophic/Problem Ponds |
|
5-8 |
50’x50’ |
35’x35’ |
|
9-12 |
100’x100’ |
70’x70’ |
|
13-15 |
130’x130’ |
100’x100’ |
|
16-20 |
170’x170’ |
125’x125’ |
|
20+ |
235’x235’ |
175’x175’ |
WATCH OUR PONDPRO YOUTUBE VIDEO ON Aeration SYSTEM INSTALLATION
