Description
Revolutionize Your Water Bodies with Can-Air Fine Bubbler Diffused Aeration Systems for Ponds, Lakes and Dugouts
Unlike any other system on the market, the Can-Air diffuser guarantees to land upright every single time it's deployed into your water body. Its diffuser surface area surpasses the competition by 38%, ensuring more efficient oxygen distribution throughout your pond or lake. Manufactured entirely in North America, our compressors are a testament to durability and reliability, backed by a comprehensive warranty.
The Can-Air SS diffuser offers the same reliable aeration system of the Can-Air diffuser but with a slightly smaller stainless steel base which is self weighted for easy install
- Durable Stainless Steel Base
- Self righting; just toss some hose in water and then the diffuser
- No gravel needed in the base to sink it - just lower into the water
- Easy to assemble and install
- 100% designed and assembled in North America
- No electricity in the water. This can be especially important where swimming is allowed.
- No floating equipment at the surface. Boating is not hindered and the natural view of the lake can be enjoyed.
- Can-Air Aeration will improve water quality by moving water slowly over the bottom substrate of the pond. Phosphates are reduced by up to 95% in many cases.
- These systems can effectively de-stratify and aerate deep lakes with much lower equipment costs and energy consumption. Can-Air systems are the most efficient and cost-effective on the market.
- 38% more diffuser area than most systems out there.
- Low maintenance. Most maintenance and inspection may be conducted onshore. Rocking piston compressors do not require internal maintenance as often as other compressors.
Our compressors and the associated cooling fans are available in 120 or 240 volt
System Size Guide
Sizing Recommendations & Expert Support
Unsure of the right system size for your needs? Consult our sizing guide below for recommendations or contact our expert team at 1-855-414-7663 for personalized advice.
Our aeration sizing recommendations to improve water quality and keep fish alive in cold & warm climates.
| Area Covered By 1 Can-Air SS Diffuser | ||||
|---|---|---|---|---|
| Pond Depth | Northern Climates | Southern Climates | ||
| Good Ponds / Preventative | Eutrophic / Problem Ponds | Good Ponds / Preventative | Eutrophic / Problem Ponds | |
| 5-8' | 65' x 65' | 45' x 45' | 75' x 75' | 55' x 55' |
| 9-12' | 125' x 125' | 85’ x 85’ | 145' x 145' | 100' x 100' |
| 13-15' | 160’ x 160’ | 125’ x 125’ | 185’ x 185’ | 145’ x 145’ |
| 16-20' | 210’ x 210’ | 160’ x 160’ | 235’ x 235’ | 180’ x 180’ |
| 20'+ | 290’ x 290’ | 220’ x 220’ | 325’ x 325’ | 245’ x 245’ |
| 30'+ | 320' x 320' | 265' x 265' | 360' x 360' | 300' x 300' |
System Components
| Can-Air 1 | Can-Air 2 | Can-Air 3 | Can-Air 4 | Can-Air 5 | Can-Air 6 |
|---|---|---|---|---|---|
|
(1) Pond Pro CA-55 Compressor (1) Compressor post-mount cabinet w/cooling fan (1) 100’ 3/8” sinking airline (1) Can-Air SS Diffuser Required Fittings
|
(1) Pond Pro CA-65 Compressor (1) 2-way manifold w/ heatline (1) Compressor post-mount cabinet w/cooling fan (2) 100’ 3/8” sinking airline (2) Can-Air SS Diffusers Required Fittings |
(1) Pond Pro CA-125 Compressor (1) 3-way manifold w/ heatline (1) Compressor post-mount cabinet w/cooling fan (3) 100’ 3/8” sinking airline (3) Can-Air SS Diffusers Required fittings |
(1) Pond Pro CA-150 Compressor (1) 4-way manifold w/ heatline (1) Compressor post-mount cabinet w/cooling fan (4) 100’ 3/8” sinking airline (4) Can-Air SS Diffuser Required Fittings
|
(1) Pond Pro CA-65 Compressor (1) Pond Pro CA-125 Compressor (1) 2-way manifold w/ heatline (1) 3-way manifold w/ heatline (2) Compressor post-mount cabinet w/cooling fan (5) 100’ 3/8” sinking airline (5) Can-Air SS Diffusers Required Fittings |
(2) Pond Pro CA-125 Compressor (2) 3-way manifold w/ heatline (2) Compressor post-mount cabinet w/cooling fan (6) 100’ 3/8” sinking airline (6) Can-Air SS Diffusers Required fittings |
Installation
Can-Air SS Aeration System Manual
Can-Air SS Diffuser Installation
If there is no aeration currently in your fish pond, the diffuser should be lowered roughly half the depth, and then slowly lowered to the bottom over the next few weeks at a rate of 2 feet every other week until it is at the pond bottom
If the diffuser is lowered to the bottom right away you risk stirring up toxic gases that could kill your fish. Lowering it slowly over time will eliminate this risk.
Can-Air systems with one, two, three, or four diffusers can be housed in one post-mounted cabinet. Two of these systems can be mounted in back-to-back cabinets (preferred).
For additional resources, including product spec sheets and manuals, visit our Resources page.
Can-Air Advantages
Why Choose Can-Air Aeration Systems?
- Canadian Made Quality: Proudly designed and manufactured in Canada, embodying years of industry leadership.
- Energy Efficiency: Featuring the cutting-edge Can-Air Rocking Piston compressor with air inlet filter for optimal energy use.
- Warranty Assurance: Enjoy peace of mind with our two year standard warranty, extended to three years when purchased with our protective cabinet.
- Enhanced Water Quality: Our systems are proven to reduce phosphates by up to 95%, drastically improving water clarity and ecosystem health.
- Cost-Effective Operation: Designed for both small and large bodies of water, our systems offer significant savings in equipment and operational costs.
- Simple Installation & Maintenance: With easy setup and minimal maintenance required, our systems are designed for convenience.
